Rock Hard Landscape Supply Rock Hard Landscape Supply Rock Hard Landscape Supply Rock Hard Landscape Supply Rock Hard Landscape Supply Rock Hard Landscape Supply

Menu

Request Brochure

Outdoor Lighting

Alliance Outdoor Lighting warrants its products against defects in material and workmanship. Without charge, Alliance Outdoor Lighting will either repair or replace (Alliance Outdoor Lighting reserves the right to decide between repair or replacement) any properly installed Alliance Outdoor Lighting product that fails under normal operating conditions within the specified warranty period.

All products are warranted from the date of invoice, provided it is returned to the Alliance Outdoor Lighting distributor from where it is purchased. Our factory inspection determines it to be defective under the terms of the warranty. This warranty covers only equipment manufactured by Alliance Outdoor Lighting and does not extend to transportation, installation, labor compensation, or replacement charges, nor does it apply to any equipment of another manufacturer used in conjunction with Alliance Outdoor Lighting equipment.

NOTE: All Alliance Outdoor Lighting products are designed to be repaired in the field by a qualified lighting installer. All service parts are readily available and we encourage field repairs as a significant cost and labor savings which can be realized by the installer. All warranted components, as stated in the above warranty, which are installed in the field, will be honored.

BL50-LED

BL50-LED

Specifications/Features:

  • Brass fixture, aged brass finish.
  • Cast brass knuckle with dial adjustment.
  • Fully Adjustable Brass shroud.
  • Ceramic bi-pin socket with lamp clip.
  • Clear glass, convex lens.
  • Lamp included.
  • 25 foot wire lead pre-connected to the fixture, 16 awg (ULlisted), brown.
  • Plastic ground stake (8.5 in; 21.6 cm length).
BL200-LED

BL200-LED

Specifications/Features:

  • Brass fixture, aged brass finish.
  • Cast brass knuckle with dial adjustment.
  • Fully Adjustable Brass shroud.
  • Ceramic bi-pin socket with lamp clip.
  • Clear glass, convex lens.
  • Lamp included.
  • Double wire lead pre-connected to the fixture, 16 awg (ULlisted), brown.
    • - 25 foot wire lead, pre-stripped for easy for easy wire connection.
    • - 18 inch wire lead, LED connection ready.
  • Plastic ground stake (8.5 in; 21.6 cm length).
FL50-LED

FL50-LED

Specifications/Features:

  • Brass fixture, aged brass finish.
  • Solid brass knuckle with dial adjustment.
  • Brass face plate with rubber gasket.
  • Ceramic bi-pin socket.
  • Clear lens.
  • Lamp included.
  • Double wire lead pre-connected to the fixture,
    16 awg (ULlisted), brown.
    • - 25 foot wire lead, pre-stripped for easy
      wire connection.
    • - 18 inch wire lead, LED connection ready.
  • Plastic ground stake (8.5 in; 21.6 cm length).
FL100-LED

FL100-LED

Specifications/Features:

  • Brass fixture, aged brass finish.
  • Solid brass knuckle with dial adjustment.
  • Brass face plate with rubber gasket.
  • Ceramic bi-pin socket.
  • Clear lens.
  • Lamp included.
  • Double wire lead pre-connected to the fixture,
    16 awg (ULlisted), brown.
    • - 25 foot wire lead, pre-stripped for easy
      wire connection.
    • - 18 inch wire lead, LED connection ready.
  • Plastic ground stake (8.5 in; 21.6 cm length).
GL100-LED

GL100-LED

Specifications/Features:

  • Brass fixture, aged brass finish.
  • Clear glass, convex lens.
  • Solid brass fixture base with extra potting.
  • Solid brass shroud with stainless steel screws.
  • Ceramic bi-pin socket with lamp clip.
  • Lamp included.
  • Lamp remover included.
  • Double wire lead pre-connected to the fixture,
    16 awg (ULlisted), brown.
    • - 25 foot wire lead, pre-stripped for easy
      wire connection.
    • - 18 inch wire lead, LED connection ready.
GL150-LED

GL150-LED

Specifications/Features:

  • Brass fixture, aged brass finish.
  • Clear glass, convex lens.
  • Solid brass fixture base with extra potting.
  • Solid brass faceplate with stainless steel screws.
  • Ceramic bi-pin socket with lamp clip.
  • Lamp included.
  • Lamp remover included.
  • Double wire lead pre-connected to the fixture,
    16 awg (ULlisted), brown.
    • - 25 foot wire lead, pre-stripped for easy
      wire connection.
    • - 18 inch wire lead, LED connection ready.
PL100-LED

PL100-LED

Specifications/Features:

  • Brass fixture, aged brass finish
  • Solid brass hat with dual adjustments, Brass thumb screw for vertical adjustments, Brass stem nut for horizontal adjustments
  • Ceramic bi-pin socket
  • Frosted Bubble Lens
  • Lamp Included
  • Double wire lead pre-connected to the fixture, 16 awg (UL listed), brown
    • - 25 foot wire lead, pre-stripped for easy wire connection
    • - 18 inch wire lead, LED connection ready
  • Plastic ground stake (8.5 in; 21.6 cm length)
ALSTEM18-LED

ALSTEM18-LED

Specifications/Features:

  • Brass stem, aged brass finish
  • Adjustable brass collar with thumb screw
  • Ceramic bi-pin socket
  • Double wire lead pre-connected to the fixture, 16 awg (UL listed), brown
    • 25 foot wire lead, pre-stripped for easy wire connection
    • 18 inch wire lead, LED connection ready
  • Plastic ground stake (8.5 in; 21.6 cm length)

Note:  Area Light Stems are sold separately.

AL100-LED

AL100-LED

Specifications/Features:

  • Brass area light hat, aged brass finish
  • Polycarbonate lens
  • Rubber gaskets
AL150-LED

AL150-LED

Specifications/Features:

  • Brass area light hat, aged brass finish
  • Polycarbonate lens
  • Rubber gaskets
AL300-LED

AL300-LED

Specifications/Features:

  • Brass area light hat, aged brass finish
  • Polycarbonate lens
  • Rubber gaskets
AL700-LED

AL700-LED

Specifications/Features:

  • Brass area light hat, aged brass finish
  • Polycarbonate lens
  • Rubber gaskets
SL75-LED

SL75-LED

Specifications/Features:

  • Brass fixture, aged brass finish.
  • Round Mounting Bracket, stainless steel, aged brass finish
  • Optional frosted lend included
  • 10 foot wire lead, 16 awg (UL listed),
    brown, Pre-connected to the fixture,
    Pre-stripped for easy wire connection.
  • 10 Year warranty on LED components and fixture housing
  • Integrated LED strip, 8 chips
    • Watts: 3w
    • Beam Angle: 120°
    • Beam Spread: Flood
    • Light Output: 120 Lumens
    • Color: Warm White
    • Color Temperature: 2700K
    • Operating Voltage: 10.8Vac - 12Vac
    • CRI: Ra>80
    • Halogen Equivalent: 20w
    • Rated Hours: 30,000

Ambient Operating Temperature: -40°C ~ +85°C

IT150-LED

IT150-LED

Description: Bluetooth ready, phone app driven, intelligent transformer. Low voltage power supply suitable for indoor or outdoor use.

Features: The ALLIANCE multi-tap low-voltage transformer includes simple and innovative features that provide the contractor a straightforward installation and reliable operation on any size
lighting project. Features Include:

  • Bluetooth Ready
  • Phone App Driven
  • Astronomical Timer
  • Fully potted, insulated, single core transformer
  • Inline surge protection
  • Stainless steel cabinet with flip up latched door
  • Multiple voltage taps
  • Removable knockouts for wire access to lug terminals
  • FOR LED ONLY
  • Lifetime Warranty

Specifications:

  • Transformer Size: 150 watts
  • Max Amperage (Load): 1.25 amps
  • Max Input (Primary Voltage): 120 volts
  • Secondary Voltage: 12 volts
  • Available Voltage Taps: 14, 14
  • Exterior Construction: Stainless Steel
IT300-LED

IT300-LED

Description: Bluetooth ready, phone app driven, intelligent transformer. Low voltage power supply suitable for indoor or outdoor use.

Features:  The ALLIANCE multi-tap low-voltage transformer includes simple and innovative features that provide the contractor a straightforward installation and reliable operation on any size
lighting project. Features Include:

  • Bluetooth Ready
  • Phone App Driven
  • Astronomical Timer
  • Fully potted, insulated, single core transformer
  • Inline surge protection
  • Stainless steel cabinet with flip up latched door
  • Multiple voltage taps
  • Removable knockouts for wire access to lug terminals
  • FOR LED ONLY
  • Lifetime Warranty

Specifications:

  • Transformer Size: 300 watts
  • Max Amperage (Load): 2.5 amps
  • Max Input (Primary Voltage): 120 volts
  • Secondary Voltage: 12 volts
  • Available Voltage Taps: 14, 14, 14
  • Exterior Construction: Stainless Steel

A-LOC

Description: Quick Locking Wire Connector

Specifications/Features:  The following come standard with an A-LOC:

  • Locking bolt
  • Pre-greased plastic caps
  • Pre-greased for easy and clean application. Provides protection from nature's elements for your connection points
  • Grouping system for cleaner installation
  • Designed for use in damp, wet, rain-tight locations